Yasaka Hair Styling Scissors

Authentic Yasaka Shears - Hair styling scissors designed to meet the most demanding hair thinning needs.

Yasaka shears use the stainless steel special cutlery steel manufactured based on the raw material iron with high purity. The character of the iron is excellent in hardness, wear and abrasion resistance, and the resistance to corrosion. The scissor blades are sharpened by our unique method that is the first of its kind. Blades are hardened and then annealed in a complete vacuum, with the blades sharpened to a point in finishing the scissors. After vacuum annealing, sub-zero treatment is provided by our own special unique process.

Already know you are interested in Yasaka Shears? Browse our full line of Yasaka Shears 

The "440C" Scissors Series:

• 440c of our company is made by Hitachi Metals
• Practical hardness is a little low though it excels in corrosion resistance because a lot of chrome is added to the metal
• However, the feeling in which the hair is cut is soft

The "ATS314" Scissor Series:

• ATS314 of our company is made by Hitachi Metals
• ATS314 is not steel for a usual blade
• ATS314 is a special material that the element was adjusted because of the hair cutting scissors
• Cobalt etc. is added and hardness has been improved
• The matrix is strengthened, and the effect of the carbide of the dropout prevention has been improved further
• The cutting blades will last long

The "VG10" Scissor Series:

• VG10 of our company is made by Takefu Special Steel
• VG10 is special cutlery steel of high purity that makes the Swedish sponge iron a raw material
• Cobalt etc. is added and hardness has been improved
• The matrix is strengthened, and the effect of the carbide of the dropout prevention has been improved further
• The cutting blades will last long

Shop for Yasaka Scissors

PRECAUTIONS

If you want to use your Yasaka scissors for a long time:

DO NOT loosen the fulcrum screw more than necessary.

When the screw loosens, open the scissors, then close one scissor using only the weight of the scissors without applying any force.
The optimal gap between the hafts is approximately 5mm. Loosen the screw and adjust the gap when it is too wide and scissors feel heavy.

Handle the scissors with care when cutting hair.

The scissor blades may crack if scissors are dropped on the floor or tossed roughly onto a table.
Remove permanent wave solution, water or dirt after using the scissors.
Corrosion resulted from chemicals may greatly reduce scissor life.
The scissor life itself shortens and blade sharpening will become impossible if scissors with dull blades are used to cut hair. Sharpen the blades immediately when they become dull.